V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
Remove the cable duct from its mountings on the right-hand suspension turret.
Note! Do not damage the paintwork.
Hold the cable duct out of the way and remove
-
the plug at the front of the variable valve timing unit (TX55)
-
the centre screw in the variable valve timing unit (TX55).
Carefully pull out the timing gear pulley with the variable valve timing (VVT) unit.
Timing gear pulleys without variable valve timing units:
Remove the screws and remove the timing belt pulley.
Remove tool 999 5452 CAMSHAFT ADJUSTMENT TOOL See: Tools and Equipment/999 5452 Camshaft Adjustment Tool.
Removing components from turbocharger (TC)
Remove
-
the upper coolant pipe with the hose
-
the heat deflector plate above the manifold
-
the oil pressure pipe for the turbocharger (TC)
-
the pipe screw at the lower coolant pipe for the turbocharger (TC). Put the pipe to one side.
-
the nuts and washers holding the manifold to the cylinder head.
Lift off the turbocharger and manifold. Carefully put them on top of the gearbox.
Releasing the inlet pipe for the coolant pump