V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
Valve Body: Service and Repair
Replacing the control system
Preparations
Remove. See Wiring harness / oil temperature sensor, replacing.
Remove:
-
the connectors for the solenoid valves
-
the screw for the oil temperature sensor holder. Remove the sensor from the control system
-
the cable harness from the holders on the control system.
Push the cable harness to one side.
Removing the control system
Remove the screws from the control system. Remove the cover from the transmission.
Note: Ensure that there are no cracks on the top of the lever for the gear selector slider.
Replacing sealing rings
Remove the sealing rings from the transmission.
Note: Ensure that no debris enters the transmission. Install new sealing rings in the transmission
Use petroleum jelly to hold the seals in position.
