Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Brakes and Traction Control > Disc Brake System > Brake Rotor/Disc > Component Information > Testing and Inspection > Measuring Lateral Wheel Hub Movement [SSS] > Page 5087

Page 2
background image

Install measurement tool set bracket. Front: Attach bracket to caliper mounting with mounting bolts from bolt set 999 5507
Rear: Attach bracket to brake caliper mounting lugs with bolts from measurement tool set 999 5418. Brake disc maximum lateral run-out must not
exceed 0.040 mm (0.0016") (brake disc front) or 0.080 mm (0.0031") (brake disc rear).

- Remove test equipment.
- If brake disc maximum lateral run-out is out of limits, it must be turned, if you have a turning tool available, or be replaced. Replacement procedure
as per QQQA. Brake disc front, replacement or RRRA. Brake disc rear, replacement.  See: Service and Repair

Note!

Illustration shows testing front.

[TTTA4]

Finishing

Go to Rear Wheel Brake Linings, Replacement [NNNA7 - NNNA12].  See: Brake Pad/Service and Repair

Brakes and Traction Control > Disc Brake System > Brake Rotor/Disc > Component Information > Testing and Inspection > Measuring Lateral Wheel Hub Movement [SSS] > Page 5087

[PREV PAGE] [NEXT PAGE]