Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Engine, Cooling and Exhaust > Engine > Seals and Gaskets, Engine > Camshaft Oil Seal > Component Information > Service and Repair > With Mechanical Adjuster > Page 1986

Page 2
background image

Lift of the camshaft belt

-

Slacken off belt tensioner center screw slightly.

-

Hold the center screw still and turn the tensioner eccentric clockwise with a 6 mm (0.24 in) allen key to "10 o'clock".

-

Lift the camshaft belt from the tension pulley, camshaft pulley and idler pulley.

Remove timing gear pulleys

-

Mark up timing gear pulleys: Both intake and exhaust.

-

Install camshaft adjustment tool 999 5452 at the rear edge of the camshafts.

-

Remove the screws for the timing gear pulleys.

-

Pull off timing gear pulleys.

Remove/install camshaft seal

-

Carefully press in tool 999 5651 between sealing ring and camshaft. Pry out seal.

Replace seal:
-

Grease and install the new seal. Use drift 999 5719 to push it on.

Remove the engine coolant fan (FC)

Engine, Cooling and Exhaust > Engine > Seals and Gaskets, Engine > Camshaft Oil Seal > Component Information > Service and Repair > With Mechanical Adjuster > Page 1986

[PREV PAGE] [NEXT PAGE]