Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Engine, Cooling and Exhaust > Engine > Seals and Gaskets, Engine > Cylinder Head Gasket > Component Information > Specifications > Page 2010

Page 3
background image

6. Remove cylinder head:

-

Remove coolant pipe screws (2).

-

Undo cylinder head screws (working inwards).

-

Remove cylinder head.

-

Remove cylinder head gasket.

7. Clean: 

-

mating faces exhaust manifold/cylinder head 

-

engine block gasket face 

-

coolant pipe gasket face 

-

gasket face between upper/lower halves of cylinder heads

NOTE:
-

Do not use a metal scraper.

-

Use a soft putty knife and gasket solvent part No. 1 161 340-3, or equivalent.

-

Surfaces must be completely clean to ensure a seal.

WARNING:  If gasket solvent is being used a fume hood or extractor must be used.

8. Align crankshaft timing marks: 

-

Remove starter motor. 

-

Remove plug. 

-

Install locking tool No. 999 5451, or equivalent. 

-

Turn crankshaft counterclockwise until it stops.

Engine, Cooling and Exhaust > Engine > Seals and Gaskets, Engine > Cylinder Head Gasket > Component Information > Specifications > Page 2010

[PREV PAGE] [NEXT PAGE]