Volvo Workshop Manuals
V70 GL L5-2.4L VIN 55 B5254S (1998)
Engine, Cooling and Exhaust > Engine > Timing Components > Timing Belt > Component Information > Service and Repair > Replacement, W/Mechanical Tensioner > Page 2063
Installing camshaft belt
Install the new belt as follows:
Install new camshaft belt over crankshaft pulley wheel.
Install vibration damper. Tighten the center nut to 180 Nm (132.8 lb ft) Use counterhold 999 5433. Remove counterhold and install new screws.
Then install the new belt in the following order:
Tighten timing belt
This adjustment is always carried out on a cold engine.
|[PREV PAGE] [NEXT PAGE]|