Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Powertrain Management > Fuel Delivery and Air Induction > Fuel Tank > Fuel Gauge Sender > Component Information > Technical Service Bulletins > Fuel Sending Unit - Installation > Page 3723

Page 4
background image

Remove the sending unit with the gasket.

5

Install new fuel sending unit

Note! 

The mark (arrow) on the sending unit must be pointing within the marks on the tape.

Install new gasket on sending unit.

Lubricate the top surface of the sending unit to avoid twisting while tightening the retaining nut. Use petroleum jelly or equivalent.

Carefully insert the new sending unit into the tank.

6

Alignment of the sending unit

Align the sending unit as per illustration.

Install the retaining nut and torque to 30 Nm (22 ft. lbs). 

Powertrain Management > Fuel Delivery and Air Induction > Fuel Tank > Fuel Gauge Sender > Component Information > Technical Service Bulletins > Fuel Sending Unit - Installation > Page 3723

[PREV PAGE] [NEXT PAGE]