Volvo Workshop Manuals
V70 GL L5-2.4L VIN 55 B5254S (1998)
Steering and Suspension > Steering > Steering Column > Steering Column Lock > Component Information > Technical Service Bulletins > Steering Wheel Lock - Updated Replacement Procedure > Page 5875
pre-drill the screw heads (1) for the mounting. Use an 3 mm drill bit (A).
Drill out the screw heads (1). Use an 8 mm drill bit (B).
To easier remove the screws, it is helpful to use left handed (reverse) drill bits to unscrew the screws. Cobalt drills are recommended.
Connector for ignition lock.
Wire for steering wheel lock.
Remove the lock.
Installing a new steering wheel lock
Position the new steering wheel lock.
Install new security screws (1).
Install connector for ignition lock.
Install cable for steering wheel lock.
Verify steering wheel lock function.
Do not forget to connect the disassembled connector.
Ensure that the boot for the windshield wiper lever is in place.
|[PREV PAGE] [NEXT PAGE]|