Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Transmission and Drivetrain > Automatic Transmission/Transaxle > Valve Body, A/T > Component Information > Service and Repair > Open The Control System > Page 4525

Page 2
background image

-

Replace with new harness as described below if ohmmeter indicates value other than 0.

4. Removal of wiring harness

-

Remove:

Gear selector cable
Lever
Gear position sensor screw and retainer for harness gland.

5. Demounting of connector

-

Remove:

Connector screws
Retainer for grommet for wiring in transmission.

-

Remove sockets from connector housing.

-

Remove rubber seal from connector.

Insert screwdriver between casing and socket and press catch in.
At the same time slide the sockets out of the casing.

Transmission and Drivetrain > Automatic Transmission/Transaxle > Valve Body, A/T > Component Information > Service and Repair > Open The Control System > Page 4525

[PREV PAGE] [NEXT PAGE]