Volvo Workshop Manuals
V70 GL L5-2.4L VIN 55 B5254S (1998)
Transmission and Drivetrain > Drive Axles, Bearings and Joints > Wheel Bearing > Component Information > Service and Repair > Front > Page 4625
Remove the screw holding the drive shaft. Counterhold the brake disc with a screwdriver.
the brake disc locating pin.
the brake disc.
Tap the end of the drive shaft into the hub approximately 10 - 15 mm (0.39" - 0.59"). Use a brass drift.
Remove the upper anti-roll bar link from the spring strut.
|[PREV PAGE] [NEXT PAGE]|