Volvo Workshop Manuals
V70 GL L5-2.4L VIN 55 B5254S (1998)
Transmission and Drivetrain > Drive Axles, Bearings and Joints > Wheel Bearing > Component Information > Service and Repair > Front > Page 4626
Remove the steering arm from the stub axle. Use puller 999 5259.
Blow clean around the ball joint with compressed air.
If the screw has rusted solid, slacken off the nut a few turns and knock the screw so that it loosens.
Note! Do not insert a screwdriver or punch between the "ears" on the stub axle.
|[PREV PAGE] [NEXT PAGE]|