Volvo Workshop Manuals
V70 GL L5-2.4L VIN 55 B5254S (1998)
Transmission and Drivetrain > Drive Axles, Bearings and Joints > Wheel Bearing > Component Information > Service and Repair > Front > Page 4627
Tap the ball joint off the stub axle
Note! The inner diameter of the sleeve must be larger than the outer diameter of the cover. This is to prevent damage to the cover.
Spray the ball joint with rust penetrant again.
Move the ball joint up and down by hand (alternatively a jimmy bar can be used) until the ball joint detaches from the stub axle.
Secure the control arm in the depressed position using tool 999 5563.
|[PREV PAGE] [NEXT PAGE]|