Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Transmission and Drivetrain > Manual Transmission/Transaxle > Seals and Gaskets, M/T > System Information > Service and Repair > Transaxle Side Seals, M/T > Page 4686

Page 2
background image

4. Remove driveshaft seal.

-

Use a lever.

5. Installing new driveshaft seal. 

-

Grease seal lip lightly.

-

Use drift tool No. 999 5541 and shaft tool No. 999 1801, or equivalent.

NOTE:  Do not use old style drift (tool No. 999 5478).

LH side:
-

Put the side of the drift marked "M56" against the driveshaft seal.

RH side
-

Put the side of the drift marked "M56" against the driveshaft seal, and turn as shown in picture on right.

Tap driveshaft in gently until drift Is touching transmission casing.

Transmission and Drivetrain > Manual Transmission/Transaxle > Seals and Gaskets, M/T > System Information > Service and Repair > Transaxle Side Seals, M/T > Page 4686

[PREV PAGE] [NEXT PAGE]