Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 XC AWD L5-2.4L Turbo VIN 56 B5254T (1998)

Engine, Cooling and Exhaust > Engine > Timing Components > Timing Belt > Component Information > Service and Repair > Replacement, W/Mechanical Tensioner > Page 2160

Page 3
background image

Remove:
-

upper timing belt cover.

-

servo reservoir and expansion tank.

-

Lift up and place on top of engine.

Note!

Take care not to spill servo oil from the bleed hole in the cap.
Place paper wipe around the reservoir and then cover with a plastic bag as protection.
Spilled servo oil is highly inflammable.

-

auxiliaries belt.

-

front camshaft belt cover.

Position engine according to marking

Raise the car.
-

Remove right front wheel.

-

Remove the nut for the cover in the fender liner.

-

Install the upper camshaft belt cover.

-

Turn crankshaft clockwise until the markings on the crankshaft and camshaft pulley correspond.

-

Turn the crankshaft a further 1/4 turn clockwise and then back again until the markings correspond. The markings are illustrated.

-

Remove upper camshaft belt cover.

Engine, Cooling and Exhaust > Engine > Timing Components > Timing Belt > Component Information > Service and Repair > Replacement, W/Mechanical Tensioner > Page 2160

[PREV PAGE] [NEXT PAGE]