V70 XC AWD L5-2.4L Turbo VIN 56 B5254T (1998)
Position camshafts/crankshaft according to marking
Remove right front wheel and slacken off fender liner slightly.
Remove vibration damper heat shield.
The camshaft pulleys should rotate until all the markings are aligned.
Check measure the belt tension
Wait 5 minutes after aligning timing belt.
Position measuring instrument 998 8500 between the exhaust camshaft pulley and coolant pump.
Read the value using a mirror, the measuring instrument must not removed before the reading is taken.
For 21 mm belts, the tension should be between 3.5-4.6 units.
For the 23 mm belt the following applies:
B5204/B5254/B5234: 2.5-4.0 units
B5252: 2.7-4.2 units
Replace tensioner damping unit if the recommended values are NOT kept.