volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 6
background image

Ensure that the harness is moved back to the left side of vehicle.

Install sending unit connector and mount connectors to the bracket.

8

Installing removed parts

Install:

- Protective cap over sending unit If applicable.

- Torque screws for fuel tank straps 25Nm (20 ft.lbs) if applicable.

- Cover plates for access holes.

- Harness bracket and connectors.

- Panels and carpeting over spare wheel.

Ensure proper operation of fuel gauge.

WARRANTY STATEMENT: Claims may be submitted under the New Car Warranty when there is a documented customer complaint, using claim type
01.

Operation No. Labor description

Time allowance

38618-2

Fuel sending unit replacement according to SB 23-0046

0.5 hr

Powertrain Management > Fuel Delivery and Air Induction > Fuel Tank > Fuel Gauge Sender > Component Information > Technical Service Bulletins > Fuel Sending Unit - Installation > Page 3969

< PREV PAGE NEXT PAGE >