volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 5
background image

Align the sending unit as per illustration.

Install the retaining nut and torque to 30 Nm (22 ft. lbs). Check installation of sending unit with gauge as per illustration.

7

Route harness

Attach the string to the connector of the sending unit. Carefully pull the harness over to the access hole for the fuel pump.

Powertrain Management > Fuel Delivery and Air Induction > Fuel Tank > Fuel Gauge Sender > Component Information > Technical Service Bulletins > Fuel Sending Unit - Installation > Page 3968

< PREV PAGE NEXT PAGE >