volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 4
background image

Reinstall/reconnect

7

-

Install split pin in lever.

-

Tighten lock-nut on boost pressure control (BPC) valve spindle.

-

Remove lest equipment.

-

Connect hose.

-

Fresh air intake to air cleaner (ACL).

-

Install heat shield.

Erase diagnostic trouble codes (DTCs).

Test drive the car and check that no DTC:s have been stored.

WARRANTY STATEMENT: Warranty may be submitted under the new car factory warranty when there is a documented customer complaint, using
claim type 01.

Operation No.

Description

Time allowance

25534-2

Load pressure, check/adjust

0.5 hr

28456-2

Self-diagnosis read

0.2 hr

28458-3

Self-diagnosis reset

0.1 hr

Powertrain Management > Fuel Delivery and Air Induction > Turbocharger > Variable Boost Control Solenoid, Turbocharger > Component Information > Technical Service Bulletins > Boost Pressure Control Valve - Checking and Adjusting > Page 4195

< PREV PAGE NEXT PAGE >