V70 XC AWD L5-2.4L Turbo VIN 56 B5254T (1998)
Support rails tool No. 999 5033, or equivalent, on fender edges.
Lifting frame tool No. 999 5006, or equivalent, on support.
Lifting hook tool No. 999 5460, or equivalent, in torque rod bracket.
Pull on hook to relieve load on engine mountings.
Left front wheel.
Remove both bolts and press splashguard forward sufficiently to release guide spigot at rear edge.
Free splashguard at front edge.
Splashguard under engine. (Early type).
Unbolt EVAP canister holder from sub-frame
Cut tie securing hoses and hang canister on body.
Unhook hose from sub-frame.
6. Oil, drain
Drain transmission oil.
Reinstall plug with new seal
Tighten to: 40 Nm.
WARNING: Oil may be extremely hot.
Steering gear nuts oil pipe bracket screw
Bolt securing front engine mounting to sub-frame
Bolts securing torque rod support on transmission
Screw securing cable conduit to front member of sub-frame.
Unhook conduit from frame.