Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 XC AWD L5-2.4L Turbo VIN 56 B5254T (1998)

Transmission and Drivetrain > Automatic Transmission/Transaxle > Seals and Gaskets, A/T > System Information > Service and Repair > Differential Side Seal, Automatic Transaxle > Page 4647

Page 2
background image

3. Removing drive shaft sealing ring

Remove drive shaft sealing ring and coupling sleeve O-ring.
Use a screwdriver.

4. Installing O-ring and sealing ring

Install a new coupling sleeve O-ring on the differential housing
Install a new drive shaft sealing ring
Lubricate seal with wheel bearing grease, part No. 1161241-3, or equivalent.
Use drift tool No. 999 5654, or equivalent.

5. Installing sealing ring

Install coupling sleeve sealing ring
Lubricate seal with wheel bearing grease, part No. 1161241-3, or equivalent.
Use drift tool No. 999 5657, or equivalent.
Tap in seal until drift bottoms on its stop against transmission.

Transmission and Drivetrain > Automatic Transmission/Transaxle > Seals and Gaskets, A/T > System Information > Service and Repair > Differential Side Seal, Automatic Transaxle > Page 4647

[PREV PAGE] [NEXT PAGE]