volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 12
background image

-

Use: 999 5743 Start the tightening with the same screw both times.

Installing the front propeller shaft

-

Check that the bevel gear and propeller shaft flange mating surfaces are clean. 

-

Install the propeller shaft as marked. Use new screws. Tighten the screws crosswise. First tighten to 8 Nm. Then tighten to 30 Nm. 

Transmission and Drivetrain > Drive/Propeller Shafts, Bearings and Joints > Drive/Propeller Shaft > Component Information > Service and Repair > Installing Propellar Shaft, All-Wheel Drive (AWD) > Page 5074

< PREV PAGE NEXT PAGE >