V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)
-
When installing a new tunnel replacing it with a new tunnel compartment 6 holes must be drilled in the new tunnel compartment for the rear panel.
-
Cut out the related piece of the old tunnel compartment and use it as a template for drilling the 6 holes in the new tunnel compartment.
AFC7. Removal of Storage Compartment:
Remove:
-
4 screws on the storage compartment.
-
the cover using a flat screwdriver.
-
the connector from the storage compartment.
AFC8. Removal of the Tunnel Compartment Cover:
Remove 5 screws from the lower edge.
AFC9. Assembly and Installation:
Assemble and install in the reverse order.