volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

With Heated Seats|Page 8300 > < With Heated Seats|Page 8298
Page 1
background image

Power Seat Drive Gear: Service and Repair
Without Heated Seats

Drive Gear In Backrest, Replace

Drive gear in backrest, replace

Preparations

CAUTION!  Install the transport safety device for the SIPS Airbag. See Replacing Seat Assembly  See: Service and Repair/Replacing Seat
Without Seat Heater/Replacing Seat Assembly

Removing

Make a note of radio code if anti-theft coded radio is installed.

Remove:

-

Battery negative lead.

-

Seat from car.  See: Service and Repair/Replacing Seat Without Seat Heater/Replacing Seat Assembly

-

Backrest upholstery.  

-

Impact protection.

-

Remove the circlips, one on each side of the drive gear housing, on the transverse shaft A.

-

Pull/tap out the shaft (A) from the drive gear housing.

-

Remove the tube protection

-

Screw (B) from drive gear housing.

-

Drive gear housing (C).

-

Remove the four screws.

-

Open the drive gear housing.

-

Remove the cables.

-

Replace drive gear. Fill drive gear housing with grease, P/N no. 116 1241-3.

Installing

Install in reverse order.

With Heated Seats|Page 8300 > < With Heated Seats|Page 8298