Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)

Engine, Cooling and Exhaust > Engine > Camshaft, Lifters and Push Rods > Camshaft Gear/Sprocket > Component Information > Service and Repair > With VVT > Page 1860

Page 3
background image

-

Install camshaft adjustment tool 999 5452 at the rear edge of the camshafts. First screw in the part of the tool intended for the exhaust camshaft.

Install the adjustment tools

Screw the camshaft adjustment tools together

-

Carefully turn the exhaust camshaft clockwise with the camshaft adjustment tool until the intake camshaft tool can be applied.

-

Screw the camshaft adjustment tools together as illustrated.

Remove the timing gear pulley 

Remove 

Exhaust camshaft pulley:

-

The plug at the front edge of the variable Valve Timing (VVT) unit (TORX 55). 

The center screw from the variable Valve Timing (VVT) unit (TORX 55).

Engine, Cooling and Exhaust > Engine > Camshaft, Lifters and Push Rods > Camshaft Gear/Sprocket > Component Information > Service and Repair > With VVT > Page 1860

[PREV PAGE] [NEXT PAGE]