Volvo Workshop Manuals
V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)
Engine, Cooling and Exhaust > Engine > Camshaft, Lifters and Push Rods > Camshaft Gear/Sprocket > Component Information > Service and Repair > With VVT > Page 1863
Install the center screw which secures the variable Valve Timing (VVT) unit to the camshaft. Do not tighten yet!
Check that the timing gear pulley is still in the limit position in the oval holes.
Install the timing gear pulley on the intake camshaft with two screws, but do not tighten.
Installing the timing belt
Tighten the center screw on the camshaft belt tensioner to 5 Nm (4 ft lbs).
Hold the variable Valve Timing (VVT) unit secure at the clockwise limit position when the belt is being installed.
|[PREV PAGE] [NEXT PAGE]|