Volvo Workshop Manuals
V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)
Engine, Cooling and Exhaust > Engine > Seals and Gaskets, Engine > Camshaft Oil Seal > Component Information > Service and Repair > With VVT > Page 2100
detach the brake vacuum hose from the intake.
the air duct for the control module box and the Air Cleaner (ACL) air intake hose.
the connectors, relays and Canister Purge (CP) valve from the fan shroud.
Place the wiring to one side.
the screws for the fan shroud and the relay holder mounting.
Lift up the relay holder and remove the upper hose between the charge air cooler and the intake.
Secure the crankshaft position
Install the adjustment tool
Pull the charge air pipe forward
Install the variable Valve Timing (VVT) unit with the toothed belt pulley:
Slacken off, but do not remove, the screws which secure the timing gear pulley to the variable Valve Timing (VVT) unit.
|[PREV PAGE] [NEXT PAGE]|