V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)
License Plate Lamp: Service and Repair
Replacing Bulb and Lens:
Turn ignition off and remove two lens retaining screws (TORX 10 or cross- head screws).
CAUTION: Do not tighten screws too hard when reassembling as the lenses are made of plastic and may crack.
-
Carefully remove the lens with a flat screwdriver.
-
Pull the defective bulb straight out.
-
Replace bulb. For type of bulb, See: Specifications
Test for proper operation.
NOTE: Lenses for 5-door cars have different P/Ns for the left and right-hand sides.
Caution: Do not tighten screws too hard as the lenses are made of plastic.
