V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)
Install the seal on the tailgate handle. The mounting points are marked with arrows on the illustration.
Locate the seal in the track above the gap where the wiring is located.
7
Preparations before installing the tailgate handle
Preparation
Check that the handle mounting reinforcement panel is centered on the holes in the tailgate.
It necessary file out the holes in the reinforcement panel so that the handle and gasket are in contact with the cover along its entire length and that there is
no tension in the handle.
When installing the handle it is important that the handle is pressed forwards / upwards and that both the center nuts are tightened first.
It is important that the pressure on the handle is maintained throughout the tightening proceedure.
8
Installing the handle
