Volvo Workshop Manuals
V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)
Maintenance > Brake Bleeding > System Information > Service and Repair > Bleeding Brakes With Bleeding Unit [AAAA] > Page 1697
Depress brake pedal a few times to remove any air bubbles in the master cylinder.
This step must be carried out between bleeding each brake caliper concerned.
Check continuously that there is enough brake fluid in the brake fluid reservoir when replacing brake fluid.
- Remove protective cap from bleed nipple and connect hose from collecting bottle.
Bleeding other wheels
Continue bleeding as per [AAAA3] In the following order:
- RH front Wheel.
Check if there is any air left in the system by depressing the brake pedal sharply (a braking power equivalent to 200 N). With the engine off and the
If pedal travel is longer than 40 mm (1.6 ins) bleed again and then re-check pedal travel.
Check that brake fluid level is not over the MAX mark.
|[PREV PAGE] [NEXT PAGE]|