volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Replacement Procedure (Driver's)|Page 7115 > < Diagram Information and Instructions|Page 7112
Page 1
background image

Air Bag: Service and Repair
Replacement Procedure (Driver's)

CDA. Removal Of Steering Wheel Airbag Module, Steering Wheel And Contact Reel.

Disassembly

Special tools: 998 8695

CDA1. Preparation

Make a note of any radio code.
Ignition off.
Disconnect the battery negative lead.

WARNING!  When assembling turn the ignition key to position II, then connect the battery negative lead. Make sure that nobody is inside the car
when connecting the battery.

CDA2. Turning The Ignition Key To Position I

WARNING!  Make sure the battery is disconnected before disconnecting or connecting the ignition wire.

Turn the ignition key to position I to unlock the steering lock.

CDA3. Loosen The Steering Wheel Screws

Loosen the two screws (Torx 30) at the back of the steering wheel. Do not remove the screws, leave them in the recesses of the steering wheel.
Turn the steering wheel to get to the screws.

CDA4. Removal of steering wheel airbag module

Replacement Procedure (Driver's)|Page 7115 > < Diagram Information and Instructions|Page 7112