V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)
Remove upholstery from seat back
-
Disconnect seat back from bottom cushion (3 screws on either side of seat).
-
Remove seat-back angle-adjustment knob (2). (Knob is on the outer side of the seat.)
-
Remove lumbar-support adjustment knob(1). Unscrew counterclockwise until it stops. Continue to unscrew counterclockwise while pulling out
firmly. (Knob is on the inner of the seat.)
-
Remove clamps (using cutting pliers) from outside of upholstery and inside between upholstery and padding.
-
Pry upholstery off.
Remove SIPS bag from seat
Remove firing circuit
Note routing of firing circuit and location of cable ties.
-
Cut cable ties (2).
-
Free firing circuit from clips.
