V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)
-
Remove seat belt from seat mounting (1 x 12 mm bolt).
-
Push seat forward.
-
Remove panels and 2 mounting bolts (14 mm) from the rear edge of the seat rails.
-
Push seat back.
-
Remove panel and 2 mounting bolts (14 mm) from the front edge of the seat rails.
-
Make a note of radio code if anti-theft coded radio is installed.
-
Ignition off.
-
Disconnect battery negative lead.
-
Disconnect the connectors from the front seat (under the seat by the front edge of the seat rail).
-
Lift the seat straight up so that the guide pins on the underside of the seat rails are freed from their holes in the floor.
Removing Seat Belt Buckle
