volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Front Seat Belt Buckle and Seat Belt Tensioner - Replacement|Page 7351 > < Front Seat Belt Buckle and Seat Belt Tensioner - Replacement|Page 7349
Page 1
background image

Seat Belt Tensioner: Service and Repair
Pyrotechnic Seat Belt Tensioner - Replacement

Replacement Requirement 

After a collision in which the SRS system has been activated. Always replace both seat belt tensioners and buckles, even if there was no passenger in
the passenger seat.

Removing Front Seat Seat Compartment 

-

Front seat as far forward as possible.

-

Remove seat compartment by lifting up its front edge and pushing it back.

The figure shows a mechanical front seat.

For power seat: 
Disconnect connector from power seat control module. The control module is located under the seat.

Secure The SIPS-bag 

WARNING:  If the front seat is equipped with a SIPS bag this must be secured before starting work. Use the transport safety device in the
holder on the inside of the seat compartment cover on the inside of a SIPS seat. Never apply external force to side of seat.
 

Front Seat Belt Buckle and Seat Belt Tensioner - Replacement|Page 7351 > < Front Seat Belt Buckle and Seat Belt Tensioner - Replacement|Page 7349