V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)
-
Mark up the center of the screw and drill a suitable hole for a screw puller. Insert screw puller and remove the screw.
-
Remove the security strap across the control module box cover.
-
Clean the control module box cover carefully so that no dirt or residue falls into the box when it is opened.
CE6 Removing the Control Module Box Cover:
Remove:
-
upper control module box mounting screw.
-
control module box cover, pry out the metal clip using a screwdriver.
CE7 Removing Control Module Box:
-
Pry out the clip at the bottom of the control module box to release its middle section.
-
Carefully pull up the middle section of the control module box.
Remove:
-
sleeve connector to control module box rear air intake.
-
rear mounting screw.