V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)
CE8 Removing Wiper Motor:
-
Pull the lower section of the control module box backwards to release it from the metal tab at the front edge of the control module box.
-
Pull the control module box backwards and lift up the cable duct to access the wiper motor. (Illustration B, within image.)
-
Remove the radiator support panel (three screws, illustration A, within image).
Remove:
-
wiper motor screws (two screws, illustration A, within image).
-
wiper motor. Pull it out from inside the engine compartment, turn the wiper motor 1/2 turn to make it easier to remove.
Installing:
CE9 Installing Wiper Motor:
Install:
-
wiper motor.
NOTE: Ensure that no cables or hoses are trapped.
-
wiper motor screws (two screws, illustration A, within image).
-
radiator support panel screws (three screws, illustration A, within image).
Connect wiper motor connector and install it in its clip as before.
CE10 Installing Control Module Box: