V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)
-
Adjust the position of the cable duct so that it is between the bodywork and radiator support panel.
-
Reinstall control module box, insert the front edge under the metal tab.
CE11 Installing Control Module Box Cover:
Install:
-
rear mounting screw.
-
sleeve connector to control module box rear air intake.
Locate the middle section of the control module box so that the control modules locate in their slots. Then press down so that the clips engage.
-
control module box cover, ensure that the clips engage.
-
upper mounting screw.
CAUTION: Take care not to damage the control modules or control module box. Check that the lower and upper sections of the control module box
are sealed and that the clips are properly engaged.
CE12 Installing Control Module Box Security Strap: