V70R AWD L5-2.5L Turbo VIN 52 B5254T4 (2004)
Disconnect the connectors for the ABS sensor and level sensor in the expansion tank.
Lift up the expansion tank and servo oil reservoir. Place them on top of the engine.
Note! Make sure that oil does not leak from the breather hole in the filler cap.
Remove:
-
front timing gear casing. Pry off the auxiliaries belt
-
the hose for the water-heated crankcase ventilation from the thermostat housing.
Separate the connector for the engine coolant temperature (ECT) sensor.
Setting up the engine
Install the upper belt protective cover.
Remove the nuts from the cover on the wing liner.
Turn the crankshaft clockwise until the markings on the crankshaft and camshafts match.
Remove the upper timing cover.
Removing the timing belt
Slacken off the centre screw for the belt tensioner slightly.
Hold the center screw secure and turn the tensioner eccentric clockwise with a 6 mm Allen key to "10 o'clock".