Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V90 L6-2.9L VIN 96 B6304S (1998)

Powertrain Management > Fuel Delivery and Air Induction > Fuel Line Coupler > Component Information > Technical Service Bulletins > Fuel System - Quick Release Connector

Page 1
background image

Fuel Line Coupler: Technical Service Bulletins
Fuel System - Quick Release Connector

850, S70/V70/C70, S90/V90, S40/V40, S60, S80
1993-

Section
2

Group
23

No.
0052

Year
00

Month
11

Reference: 
This Service Bulletin replaces the previous Service Bulletin 230052 from October 2000, which should be discarded.

Connecting the Quick release connector, updated method

Background
This Service Bulletin describes an updated method for connecting the quick-release connectors in the fuel injection system.

Material

Connecting the quick-release connector, updated method

1

Quick-release connector, fuel system

There are a number of quick-release connectors on the fuel injection system the fuel tank, the fuel filter and the intake manifold. In addition, a
quick-release connector can be found on certain cars at the rear edge of the sub-frame.

These quick-release connectors are of differing designs and are taken apart in different ways. For certain quick-release connectors special tools are
required.

All quick-release connectors have O-rings as seals

2

Lubricating when connecting quick-release connectors

Powertrain Management > Fuel Delivery and Air Induction > Fuel Line Coupler > Component Information > Technical Service Bulletins > Fuel System - Quick Release Connector

[PREV PAGE] [NEXT PAGE]