Volvo Workshop Manuals
V90 L6-2.9L VIN 96 B6304S (1998)
Powertrain Management > Fuel Delivery and Air Induction > Fuel Line Coupler > Component Information > Technical Service Bulletins > Fuel System - Quick Release Connector > Page 1990
The quick-release connectors in the marked area (arrow in the illustration) on the fuel line must be lubricated using lubricant p/n 1161580 before
Engine oil (mineral oil) may also be used. Do not use synthetic engine oil.
Checking that connection is secure
Check that the quick-release connector has locked. Try pulling the connector apart by hand firmly using approximately 10-20 lb of force.
Ensure that there is some ploy in the connector. Press the connector together and pull the connector apart.
The illustration displays an example of the connection.
|[PREV PAGE] [NEXT PAGE]|