Volvo Workshop Manuals
V90 L6-2.9L VIN 96 B6304S (1998)
Relays and Modules > Relays and Modules - HVAC > Control Module HVAC > Component Information > Technical Service Bulletins > Customer Interest for Control Module HVAC: > 887955 > Sep > 97 > A/C - Unpleasent Odor On Startup > Page 163
Route the green cables on the cable harness to the engine compartment through the vacant hole in the grommet under the brace to the suspension
1988 and 1989 model years:
Connect the flat connectors.
Year model 1990 cars (shown here):
Connect the round connectors.
Connect all unconnected connectors to each other.
The cut conduit section should be placed at the lowest point along the route of the cable.
Use butyl tape to seal the grommet.
Use existing cable tie to clamp cables to firewall.
Installing control module from kit
|[PREV PAGE] [NEXT PAGE]|