Volvo Workshop Manuals
V90 L6-2.9L VIN 96 B6304S (1998)
Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Wheel Speed Sensor > Component Information > Service and Repair > Rear Sensor > Page 425
Wheel Speed Sensor: Service and Repair
FRONT SENSOR WHEEL, REPLACEMENT (SEPARATE HUB AND DISC)
Special tools: 951 2050, 9995082, 5225, 5294, 5340, 5350, 5351, 5408
AM1. Jack up and support rear of car. Remove wheel
Place support stands under jacking points.
AM2. Remove brake caliper
Remove both mounting bolts and lift off caliper. Tie up caliper to prevent damage to hose.
wheel locating stud
brake disc. Mark position of disc with respect to hub
dust cap. Loosen by tapping all around with sharp chisel
Note: Dust cap and nut must not be reused.
AM4. Remove hub nut
Use long bar and 36 mm socket.
|[PREV PAGE] [NEXT PAGE]|