Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V90 L6-2.9L VIN 96 B6304S (1998)

Sensors and Switches > Sensors and Switches - Transmission and Drivetrain > Sensors and Switches - A/T > Downshift Switch, A/T > Component Information > Service and Repair > Page 664

Page 2
background image

Fig. 5 Kickdown Switch Adjustment

-

Unhook cable from AR

-

Press out cable from inside of firewall with screwdriver to release locking tabs behind cable grommet.

-

Prepare cable grommet

-

Squeeze and wrap a few turns of electrical tape around grommet.

-

Cut tape about 4 inches from grommet.

Installation 

-

Install cable with kickdown switch terminal pins facing straight.

-

Ensure that cable tags grip inside of firewall panel securely.

-

Pull off tape around grommet and check that grommet is seated against soundproofing on panel. 

-

Ensure that rubber stop is in place in AP lug.

-

Hook cable and retainer onto AP, ensuring that ball on cable end is seated in bottom of retainer.

Sensors and Switches > Sensors and Switches - Transmission and Drivetrain > Sensors and Switches - A/T > Downshift Switch, A/T > Component Information > Service and Repair > Page 664

[PREV PAGE] [NEXT PAGE]