Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V90 L6-2.9L VIN 96 B6304S (1998)

Transmission and Drivetrain > Automatic Transmission/Transaxle > Actuators and Solenoids - A/T > Shift Solenoid, A/T > Component Information > Specifications > Page 2233

Page 3
background image

Checking Resistance Of Solenoids S1, S2 And SL

-

Connect ohmmeter between solenoid S1 connector pin and ground terminal on transmission. Instrument should indicate 10 - 15 ohm.

-

Repeat measurement for solenoids S2 and SL. Instrument should indicate 10 - 15 ohm.

-

Solenoid in question must be replaced if instrument indicates different value in any of above measurements.

Check Resistance Of Solenoid STH 

-

Connect ohmmeter between two pins in solenoid connector. Instrument should indicate 2 - 6 ohm.

-

Solenoid must be replaced if instrument indicates different value. 

Replacement Of Solenoids 

Removing solenoids S1 and S2 
-

Remove solenoid retainer.

-

Withdraw solenoids S1 and S2 from control system.

Transmission and Drivetrain > Automatic Transmission/Transaxle > Actuators and Solenoids - A/T > Shift Solenoid, A/T > Component Information > Specifications > Page 2233

[PREV PAGE] [NEXT PAGE]