XC60 FWD L6-3.2L VIN 96 B6324S2 (2010)
![background image](/volvo/xc60_fwd/l6-3.2l_vin_96_b6324s2/Page-2381010.png)
-
Remove the covers from the inside of the side members, on both sides.
-
Thoroughly clean away splashes of underseal, putty or dirt from the plate surfaces on the insides of the side members where the reinforcements
shall be located.
-
Check that the mating surfaces inside the side members are clean. If necessary, clean opposite where the towing member is to be tightened.
-
Take the towing member from the kit and insert the two side plates in the holes at the rear edge of the side members.