XC60 FWD L6-3.2L VIN 96 B6324S2 (2010)
![background image](/volvo/xc60_fwd/l6-3.2l_vin_96_b6324s2/Page-2529025.png)
Net pocket, side panel
-
Attach a piece of tape edge-to-edge with the panel for the rear load securing eyelet as illustrated. Measure and mark out for drilling holes for the
lower rear clip.
-
Attach a piece of tape on top of the previous one as illustrated. Measure for drilling the upper hole for the clip.
-
Drill two -3 mm (1/8") holes through the panel. Use a 10 mm (25/64") drill stop.
-
Remove the pieces of tape and swarf.