volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Heater Core|L.H.D.|Page 3253 > < Engine Temperature Sensor|Page 3248
Page 1
background image

Heater Core: Service and Repair
L.H.D.

Heat exchanger, replacing

Special tools:

115 8957 HOSE PLIERS See: Tools and Equipment/115 8957 Hose Pliers 
951 1506 Test dummy See: Tools and Equipment/951 1506 Test Dummy 

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.

Preparatory work

Caution! Cars with DSTC systems. When working on the steering or wheel alignment, the adaptation of the steering wheel angle must be set to
zero using the diagnostic tool. Test drive according to: Test Drive Form (DSTC (dynamic stability and traction control) /brake control module),
description See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Testing and Inspection/Initial Inspection and
Diagnostic Overview/Test Drive Form (DSTC (Dynamic Stability And Traction Control) /Brake Control Module), Description.

Removing the steering wheel

Remove the driver's airbag module according to: Airbag driver and passenger (SRS), replacing See: Restraint Systems/Air Bag Systems/Air Bag/Service
and Repair.
Remove the lock screw from its "parking hole" in the steering wheel and install it in the contact reel.

Heater Core|L.H.D.|Page 3253 > < Engine Temperature Sensor|Page 3248