Do Not Sell My Personal Information
volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 3
background image

Remove the lock

Caution! Make sure that the connector pins end up in the correct position.

Install the connector pins in the seat so that the locks on the pin end up in the opening on the side of the seat.

Install the catch.
Install the casing.

Splice the cables.  Refer to: Joining the cables See: Cooling System/Radiator Cooling Fan/Diagrams/Diagnostic Aids/Wiring/Joining the Cables 

Engine, Cooling and Exhaust > Engine > Actuators and Solenoids - Engine > Variable Valve Timing Actuator > Component Information > Service and Repair > Camshaft Seal/Variable Valve Timing (VVT) Unit, Replacing > Page 2601

< PREV PAGE NEXT PAGE >