Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)

Engine, Cooling and Exhaust > Engine > Actuators and Solenoids - Engine > Variable Valve Timing Actuator > Component Information > Service and Repair > Camshaft Seal/Variable Valve Timing (VVT) Unit, Replacing > Page 2602

Page 4
background image

Caution! Make sure that the cable cannot enter the timing gears by clamping any excess cable with cable ties.

Applies to all: Installing VVT-control valve 

Clean the gasket faces. Note the cleanliness requirements above.

Install a new gasket.
Install a new control valve. Tighten the control valve crosswise. Tighten to 10 Nm

Connect the connector.

Engine, Cooling and Exhaust > Engine > Actuators and Solenoids - Engine > Variable Valve Timing Actuator > Component Information > Service and Repair > Camshaft Seal/Variable Valve Timing (VVT) Unit, Replacing > Page 2602

[PREV PAGE] [NEXT PAGE]