Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)

Engine, Cooling and Exhaust > Engine > Engine Lubrication > Engine Oil > Component Information > Service Precautions > Page 2871

Page 2
background image

Remove:

-

the filter insert from the housing

-

the O-ring that seals between the housing and the oil trough.

Allow the filter insert to drain and then discard it in an approved place.

Installing the oil filter

Caution! Clean the housing.

Install:

-

a new filter insert

-

a new O-ring. Lubricate the O-ring

-

the oil filter housing. Tighten to Tightening torque See: Specifications/Mechanical Specifications/Tightening Torque.

Install the lower cover.

Filling with engine oil

Lower the vehicle and fill with oil.

Check:

Start the engine and check for oil leakage.
Stop the engine and give the oil time to run down into the oil pan.
Then check the oil level. Top up if necessary but do not overfill. Wipe the engine compartment clean. Ensure that the steering wheel and the gear
selector lever are clean.

Engine, Cooling and Exhaust > Engine > Engine Lubrication > Engine Oil > Component Information > Service Precautions > Page 2871

[PREV PAGE] [NEXT PAGE]