Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)

Engine, Cooling and Exhaust > Engine > Engine Lubrication > Oil Cooler, Engine > Component Information > Service and Repair

Page 1
background image

Oil Cooler: Service and Repair

Oil cooler, replacing

Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information is always correct.

Oil cooler, removing:

Raise the car.

Remove:

-

the lower splash guard.

Clamp both the oil cooler coolant hoses together with lock grip pliers.

Remove:

-

the coolant hoses from the oil cooler

-

the oil cooler mounting screws.

Note! Collect the oil that drains from the oil cooler and any coolant.

Lift down the oil cooler.

Oil cooler, installing:

Use new seals.
The seals must be greased prior to installation.

Install:

-

the oil cooler.

Screw the 4 oil cooler screws into place.
Tighten to: 17 Nm

-

the coolant hoses.

Remove the lock grip pliers.
Screw the splash guard into place.

Engine, Cooling and Exhaust > Engine > Engine Lubrication > Oil Cooler, Engine > Component Information > Service and Repair

[PREV PAGE] [NEXT PAGE]